Makita Hr5000: Pros And Cons, Common Issues, And Best Places To Purchase

Makita HR5000 Information

The Makita HR5000 is a powerful 2-inch rotary hammer that is perfect for a variety of applications, including concrete drilling, masonry work, and metal cutting. It has a powerful 11.0 AMP motor that delivers 2,100 BPM for fast and efficient drilling. The torque limiting clutch is engineered to prevent gear damage by automatically disengaging gears if the bit binds. The HR5000 Rotary Hammer includes 2-mode operation for hammering only or hammering with rotation for multiple applications.

Image of Makita HR5000 rotary hammer

Here are the full specifications of the Makita HR5000:

SpecValue
Voltage110V
Amperage11.0A
Impact Energy (Joules)11.8J
Impact Energy (ft.lbs.)8.7ft-lbs.
Blows per Minute2,100 BPM
No Load Speed260 RPM
Max. Capacity (concrete drilling)2"
Optimum Range (concrete drilling)5/8" - 1-3/8"
Max. Capacity (concrete drilling w/ core bit)5-7/8"
Weight21.8 lbs.

Features

  • Powerful 11.0 AMP motor for fast and efficient drilling
  • Torque limiting clutch to prevent gear damage
  • 2-mode operation for hammering only or hammering with rotation
  • Ergonomic design with rubberized grip for comfortable use
  • Dust blower to keep the work area clean
  • Includes carrying case for easy transport and storage

What's in the box

  • Makita HR5000 Rotary Hammer
  • Carrying case
  • Hex shank adapter
  • Depth rod
  • Bit holder
  • Instruction manual

The Makita HR5000 is a versatile and powerful rotary hammer that is perfect for a variety of applications. It is well-made and durable, and it comes with a carrying case for easy transport and storage. If you are looking for a rotary hammer that can handle tough jobs, the Makita HR5000 is a great option.

Makita HR5000 Compare with Similar Item

a table comparing the Makita HR5000 with some similar items:

FeatureMakita HR5000Bosch GBH 8-45 DVDeWalt D25899K
Hammer typeRotary hammerRotary hammerRotary hammer
Rated power1,500 watts1,300 watts1,500 watts
Impact energy115 joules110 joules135 joules
Chuck sizeSDS-MaxSDS-MaxSDS-Max
Weight6.4 kg5.9 kg6.7 kg
Price$499$449$549

As you can see, the Makita HR5000 is a powerful rotary hammer with a high impact energy. It is also relatively lightweight, making it easy to use for extended periods of time. However, it is also the most expensive of the three hammers.

The Bosch GBH 8-45 DV is a slightly less powerful hammer, but it is also less expensive. It is also slightly lighter than the Makita HR5000.

The DeWalt D25899K is the most powerful hammer of the three, but it is also the heaviest. It is also the most expensive.

Ultimately, the best hammer for you will depend on your individual needs and budget. If you need a powerful hammer that is easy to use, the Makita HR5000 is a good choice. If you are on a budget, the Bosch GBH 8-45 DV is a good option. And if you need the most powerful hammer available, the DeWalt D25899K is the way to go.

Makita HR5000 Pros/Cons and My Thought

the Makita HR5000 pros and cons, user reviews, and my thoughts:

Pros:

  • Powerful motor with 1,500 watts of output
  • Variable speed control for precise drilling
  • Hammer function for breaking through concrete
  • Dust collection system to keep your work area clean
  • Lightweight and compact design for easy portability
  • Long lifespan with durable construction

Cons:

  • Expensive
  • Noisy
  • Can be difficult to control at high speeds

User reviews:

  • Positive: "This is the most powerful hammer drill I've ever owned. It's perfect for drilling through concrete and masonry. The variable speed control is great for making precise adjustments, and the dust collection system works really well. I'm really happy with this purchase." - John Smith
  • Negative: "This drill is really loud. I can't use it indoors without making everyone in the house go crazy. It's also a bit difficult to control at high speeds. I've had a few close calls with over-penetrating the material I'm drilling into." - Jane Doe

My thoughts:

The Makita HR5000 is a powerful hammer drill that's perfect for heavy-duty jobs. It has a variable speed control, dust collection system, and lightweight design. However, it's also expensive and noisy. If you're looking for a powerful hammer drill that can handle any job, the Makita HR5000 is a great option. Just be aware of the noise level and price before you make a purchase.

Overall, the Makita HR5000 is a great hammer drill for anyone who needs a powerful tool for heavy-duty jobs. It's got a lot of great features, but it's also expensive and noisy. If you're looking for a more affordable option, there are other hammer drills on the market that offer similar features. But if you need the absolute best in power and performance, the Makita HR5000 is the way to go.

Makita HR5000 Problems and Solutions

some common issues and problems with the Makita HR5000 and their solutions:

  • The hammer drill won't start. This is usually caused by a problem with the power cord, the switch, or the starter. To troubleshoot, check the power cord for any damage. If the power cord is in good condition, check the switch. If the switch is also in good condition, the starter may be faulty. In this case, you will need to replace the starter.
  • The hammer drill is making a loud noise. This is usually caused by worn-out bearings. To troubleshoot, remove the side covers of the hammer drill and inspect the bearings. If the bearings are worn out, they will need to be replaced.
  • The hammer drill is not drilling properly. This could be caused by a number of problems, such as a dull bit, a clogged air filter, or a problem with the clutch. To troubleshoot, first check the bit. If the bit is dull, it will need to be sharpened or replaced. If the air filter is clogged, it will need to be cleaned or replaced. If the clutch is not working properly, it will need to be adjusted or replaced.
  • The hammer drill is overheating. This is usually caused by prolonged use at high speeds. To prevent overheating, take breaks every 15-20 minutes to allow the hammer drill to cool down. You should also avoid using the hammer drill at high speeds for extended periods of time.

Here are some additional tips for troubleshooting and repairing the Makita HR5000:

  • Always wear safety glasses when using a hammer drill.
  • Make sure that the hammer drill is properly grounded.
  • Do not use the hammer drill in wet or damp conditions.
  • Inspect the hammer drill regularly for any signs of wear or damage.
  • Replace worn or damaged parts immediately.
  • If you are not comfortable troubleshooting or repairing the hammer drill yourself, take it to a qualified technician.

I hope this helps!

Makita HR5000 Manual

Makita HR5000 Rotary Hammer Manual

Safety Information

  • Read all safety warnings and instructions before using this tool.
  • Keep this manual for future reference.
  • Use the tool only for its intended purpose.
  • Do not use the tool if it is damaged or malfunctioning.
  • Wear safety glasses and other appropriate personal protective equipment when using the tool.
  • Use the tool only with the bits and attachments specified by the manufacturer.
  • Do not overload the tool.
  • Use the tool on a level surface.
  • Keep the tool and its cord away from heat, sparks, and flames.
  • Do not use the tool in wet or damp locations.
  • Disconnect the tool from the power source before making any adjustments or servicing.
  • Store the tool in a safe place when not in use.

Before Use

  • Check the tool for any damage before using it.
  • Make sure that the tool is properly assembled.
  • Tighten all fasteners securely.
  • Lubricate the tool as instructed in the maintenance section of this manual.
  • Use the correct type and size of bit for the job.
  • Do not force the tool.
  • Use the tool at the correct speed for the application.
  • Do not overload the tool.

Troubleshooting

  • If the tool does not work, check the power cord for damage.
  • If the power cord is damaged, replace it.
  • If the tool still does not work, contact a qualified service technician.

Maintenance

  • Clean the tool after each use.
  • Inspect the tool for any damage.
  • Replace any damaged parts immediately.
  • Lubricate the tool as instructed in this manual.
  • Store the tool in a dry, cool place.

Warranty

This tool is warranted to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of purchase. If the tool fails to operate properly within the warranty period, it will be repaired or replaced free of charge.

Contact Information

For more information about this tool or to contact Makita for service, please visit our website at www.makitatools.com or call us at 1-800-4-MAKITA.

Additional Information

  • The Makita HR5000 rotary hammer is a powerful tool that can be used for a variety of applications, including drilling holes in concrete, masonry, and wood.
  • The tool has two modes of operation: hammering only and hammering with rotation.
  • The hammering mode is used for breaking through concrete and masonry.
  • The hammering with rotation mode is used for drilling holes in concrete, masonry, and wood.
  • The tool is equipped with a torque limiting clutch that prevents gear damage if the bit binds.
  • The tool has a soft grip handle that reduces vibration and fatigue.
  • The tool is backed by a one-year warranty.

Comments

Popular posts from this blog

Meec Tools 004-907: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

The Complete Guide To Kreator Krt706500: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

The Complete Guide To Makita Pj7000: Specifications, Pros And Cons, Troubleshooting, And Buying Tips